Monday, February 6, 2017

There are some Eleaf iStick Pico Main properties, you can have a look.
1. Atomizer Protection: Each time when vaping time exceeds 10 seconds, the output shuts off automatically with “Over 10s” display on the screen.
2. Atomizer Low Alert: When the resistance of coil is lower than 0.1ohm in VW/Bypass mode or lower than 0.05ohm in TC modes, the screen will display “Atomizer Low”.
3. Atomizer Short-circuit & No Atomizer Protection: When atomizer short-circuit occurs, the screen will display “Atomizer Short”. The screen will display “No Atomizer” when there is no atomizer connected.
http://www.istick.org/eleaf-istick-pico-75w-tc-box-mod.html
4. Low-voltage Protection: When the voltage of the cell is below 3.1V, the screen will first display “Battery Low” and then “Lock”. Charge the cell to unlock the device.
5. Temperature Protection: In TC modes, when the actual temperature of coil reaches the set temperature, the screen will display “Temp Protection”. You can continue to use the device normally.
6. Temperature Alert: If the temperature of device is over alert temperature, the output will shut off automatically and the screen will display “Device Too Hot”. You can continue to vape after it cools down.
7. Weak Battery Alert: In all vaping modes, when the device is working with an atomizer and the voltage of the cell drops below 2.9V, the screen will display “Weak Battery”. Meanwhile, the output power will be reduced accordingly.

Hope you can enjoy play Eleaf iStick Pico, if you have any questions, you can contact well-known Brand "Eleaf" official facebook page or official authorized distributor facebook page. 

0 comments:

Post a Comment