• ASTER RT with MELO RT 22

    The ASTER RT is a skillfully designed "Recessed Tank" (RT) style compact mod that is able to hold and hide tanks up to 22mm diameter.Click Here to know more about Eleaf/iSmoka Product

  • Reuleaux RX2/3

    Reuleaux RX2/3, an updated version of Reuleaux series, designed by JayBo, features the replaceable back cover for two or three cells. The high power output of 150W or 200W is available for your preference. Click Here to know more about Wismec Products

  • Kanger CUPTI-2 Starter kit

    Kanger Cupti 2 Starter Kit comes with three colors, it's powered by two 18650 batteries (sold separately), which can fire up to 100W power. Click here to know more KangerTech Products

Monday, February 20, 2017

The iJust 2 Kit By Eleaf come with A 2600mAh cell powers the iJust 2 along with a 5.5mL tank for excessive vaping without having to stop and refill. iJust 2 Tank is cross compatible with the following coils: Herakles, Triton, & v-Air

Monday, February 6, 2017

There are some Eleaf iStick Pico Main properties, you can have a look.
1. Atomizer Protection: Each time when vaping time exceeds 10 seconds, the output shuts off automatically with “Over 10s” display on the screen.
2. Atomizer Low Alert: When the resistance of coil is lower than 0.1ohm in VW/Bypass mode or lower than 0.05ohm in TC modes, the screen will display “Atomizer Low”.
3. Atomizer Short-circuit & No Atomizer Protection: When atomizer short-circuit occurs, the screen will display “Atomizer Short”. The screen will display “No Atomizer” when there is no atomizer connected.
http://www.istick.org/eleaf-istick-pico-75w-tc-box-mod.html
4. Low-voltage Protection: When the voltage of the cell is below 3.1V, the screen will first display “Battery Low” and then “Lock”. Charge the cell to unlock the device.
5. Temperature Protection: In TC modes, when the actual temperature of coil reaches the set temperature, the screen will display “Temp Protection”. You can continue to use the device normally.
6. Temperature Alert: If the temperature of device is over alert temperature, the output will shut off automatically and the screen will display “Device Too Hot”. You can continue to vape after it cools down.
7. Weak Battery Alert: In all vaping modes, when the device is working with an atomizer and the voltage of the cell drops below 2.9V, the screen will display “Weak Battery”. Meanwhile, the output power will be reduced accordingly.

Hope you can enjoy play Eleaf iStick Pico, if you have any questions, you can contact well-known Brand "Eleaf" official facebook page or official authorized distributor facebook page. 

Friday, February 3, 2017

iStick 50W is a super upgraded version based on iStick series batteries. Powerful vapor can be generated due to the expanded range of output voltage (2V-10V)/ wattage (5W-50W) with 4400 mAh battery capacity. It retains strong spring connector and wear-resistant stainless steel thread. Moreover, the additional temperature alarm function makes it high-safety even in strong vaping. Great feeling when you hold it because of its size and the rounded edges, while side charging port is also a plus.

How to use Eleaf iStick 50W

Press the rectangle button for five times to turn on the battery, and then long press it to get a puff. Loosen the button to stop puff.
http://www.istick.org/istick-50w.html

Switch the VV/VW mode:
Press the rectangle button for three times to switch the VV/VW mode when the battery is on. In VV mode, you can adjust output voltage between 2.0V-10.0V. In VW mode, you can adjust output wattage between 5W-50W.

Adjust the voltage/wattage:
Press the up-and-down arrow buttons to increase or decrease the voltage/wattage. Keep pressing the up/down arrow button, voltage/wattage will increase or decrease slowly at first, then they will increase/decrease at a constantly high speed. The number will stop increasing/decreasing when you loosen the up/down arrow button. Temperature Alarm: If the temperature of device is over 70℃, the output will shut off automatically and the screen will reflect "Temp Protection" for 5 seconds. After that, the screen will back to normal and then you can continue vaping.

Arrow button lock functionality:
Keep pressing up-arrow button and down-arrow button simultaneously for 2 seconds when the battery is on, then they will be locked and the screen will reflect "Lock". Still keep pressing simultaneously for 2 seconds to unlock them and the screen will reflect "Unlock". Through these operations, you can protect the buttons from unintentional presses and prolong their service life.

Switch the display mode:
Keep pressing up-arrow button and down-arrow button simultaneously for 2 seconds when the battery is off, the screen display will rotate 180 degrees. You can view the screen from two kinds of angle through this operation.
Powered by Well-known Electronic Cigarette brand Eleaf.